Hang Signs with Ceiling Magnets

Signs and displays can be hung across one or more metal beams, or drop ceiling bars, using the Dual or Multi MagMover. This example shows a new Dual hanging a sign and then safely removing it.

Dual MagMover holds 2 strong ceiling magnets to suspend sign.

Attach Balloon HangTabs to opposite ends of the sign. Tie each HangTab to a ClikMagnet with equal length line.

Twist a Dual MagMover onto a MagPole. Position the ClikMagnets on the MagMover.

Lift sign to ceiling with extension pole.

Here's a closer view of the MagMover and ClikMagnets. Since this is a ceiling installation with a Dual, the stem holding the ring should go into the center hole. See placement instructions for details.

Magnets attach to ceiling.

Extend the MagPole to reach the ceiling. Align only the first ClikMagnet with the metal surface.

Hang sign with magnets.

The ClikMagnet adheres upon contact.

Walk to where you want the next attachment point (any desired distance allowed by the length of your suspension lines).

Suspend sign with strong ceiling magnets . Hang signs quickly from the ground.

Angle the MagMover so the second magnet is now aligned with the metal surface. As before, it will pull off the MagMover and attach.

Suspend sign with strong ceiling magnets . Hang signs quickly from the ground.

It's Up! The job is completed in seconds... without a ladder or the risk of ceiling damage.

--- Continue Project: Takedown ---

--- Back to Top ---